Additional Information

Site Information

 Loading... Please wait...
  • Image 1

FOREVER Laser Multi-Trans

$0.00
SKU:
LPMULTITRANS
Weight:
0.00 LBS
Shipping:
Calculated at checkout
Quantity:

Product Description

Laser Multi-Trans transfer paper is for use with the new generation of colour laser printers and copiers which operate at higher fusing temperatures, as well as older models that use silicone oil fusing.

 

See list of compatible printers (pdf) from FOREVER.

For use on mugs, plates, beer steins, magnetic vinyls, wood, place mats, chromolux, tiles, mirrors, acrylic glass, metal, nylon, lighters, pens, CDs, etc.



 

Heat Transfer Instructions

 

Printer Instructions

  • Laser Multi-Trans transfer paper is for use with the new generation of colour laser printers and copiers which operate at higher fusing temperatures, as well as older models that use silicone oil fusing.
  • Paper Mode: See list of compatible printers (pdf) from FOREVER.
  • Feeding: Bypass (manual feeding)

Transfer Settings

Surface 
Heat Press Pressure
Preheating Time
Opening TemperaturePeeling InstructionsFixing Time
Aluminium
4-5 bar (55-70 PSI)
N/A
120°C (250°F) Warm or cold 60 seconds
Adhesive Film
4-5 bar (55-70 PSI)
N/A 130°C (265°F) Let cool for 5-10 seconds N/A
Chromolux Binder 3-4 bar (40-60 PSI) 5 seconds 105°C (220°F) Warm or cold N/A
Wood 3 bar (40 PSI) 20 seconds 100°C (220°F)
Immediately! 30 seconds
Ceramic Tile 4-5 bar (55-70 PSI) N/A 130°C (265°F) Warm or cold 60 seconds
Magnetic Vinyl 4-5 bar (55-70 PSI) N/A 115°C (240°F)
Warm or cold 60 seconds
Acrylic Glass 4-5 bar (55-70 PSI) N/A 100°C (220°F) Let cool for 5-10 seconds N/A
Mirror 4-5 bar (55-70 PSI) N/A 145°C (265°F) Warm or cold N/A
Mouse Pad 4-5 bar (55-70 PSI) N/A 110°C (230°F) Warm or cold N/A
Place Mat
4-5 bar (55-70 PSI)
N/A 110°C (230°F)
Warm or cold 60 seconds

Transfer Application

  1. Set the temperature of the heat press to 200°C (390°F).
  2. Place substrate on lower plate of heat press.
  3. Place transfer paper on substrate and cover with silicone pad.
  4. Place digital temperature sensor between transfer paper and substrate. The relevant temperature is that of the surface of the substrate.
  5. Press until temperature sensor displays temperature listed in table above for the relevant substrate.
  6. If required (see table above) fix transfered image with a pressure of 2 bar using a wooden frame.

Other Details

Transfer Type:
Laser

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!

Find Similar Products by Category

Click the button below to add the FOREVER Laser Multi-Trans to your wish list.