Laser Classic Universal transfer paper is for use with the new generation of colour laser printers and copiers which operate at higher fusing temperatures, as well as older models that use silicone oil fusing.
See list of compatible printers (pdf) from FOREVER.
For use with white and light coloured textiles.
Product Benefits
- It's universal! This products works on old and new colour laser printers and copiers
- Very sharp print quality
- Soft hand
- Very good wash fastness
- On demand printing
- User friendly photo-realistic image quality in glossy or matte finish
Note: For white and light coloured textiles 100% cotton, cotton/poly blends, performance wear, white polyester etc.
Heat Transfer Instructions
Printer Instructions
- Laser Classic Universal transfer paper is for use with the new generation of colour laser printers and copiers which operate at higher fusing temperatures, as well as older models that use silicone oil fusing.
- Transfer must be printed in mirror image mode.
- Paper Mode: See list of compatible printers (pdf) from FOREVER.
- Feeding: Bypass (manual feeding)
Transfer Settings
| |
Automatic Heat Press
|
Manual Heat Press
|
| Pressure |
5 bar (70 PSI)
|
High/Maximum
|
| Temperature |
200°C (390°F)
|
| Time |
10-15 seconds
|
Transfer Application
- Place textile on lower plate of heat press.
- Press the textile for a few seconds to remove any wrinckles and moisture.
- Place transfer on textile at the desired location.
- Press for 10 to 15 seconds.
- Peel the transfer paper immediately. Never remove the textile from the press before the paper has been peeled off.
- To improve washability, cover the transfered image with parchment (baking) paper and press again for 10 seconds.
- For a softer hand stretch the garment width wise.
Washing
- Wash in cold or warm water (up to 40°C).
- It is recommended to allow 24 hours to pass, after transfer is applied, before washing.
Ironing
When ironing cover the transfered image with parchment (baking) paper.
